Don’t Slip With DURATREAD

Fiberglass reinforced plastic (FRP) solutions tend to be large. Large panels of sheet or grating and even entire structures can be fabricated from FRP materials. Sometimes simpler, smaller products can fall through the cracks – one of those products is the REDCO™ DURATREAD™ stair tread covers. These are hand-molded fiberglass covers to existing stairways. What they provide is a tough, anti-slip solution where this may be a concern. Concrete or wooden steps in moist or cold areas is of particular concern.

The treads are made of strong fiberglass mat and coated with aluminum oxide grit and then painted. The standard color is dark grey with a safety yellow nosing. REDCO™ DURATREAD™ covers are available in thicknesses of 1/8″ and 1/4″. Standard depths are 8″, 9″, 10″, 11″ and 12″. All stair tread covers are available in 12′ lengths. Other lengths and depths are available upon request. The treads can be affixed mechanically or with an adhesive, depending on the application.

There are many potential areas where these treads can be an effective solution including:

•    Amusement/Water Parks
•    Hotels/Motels
•    Outdoor Stairways
•    Outdoor Sports Facilities
•    Restaurants
•    Food Processing Facilities
•    Chemical Processing Plants
•    Water/Wastewater Treatment Facilities

For more information on the REDCO™ DURATREAD™ stair tread covers contact Redwood Plastics.